Much has been said and written about modern day hair loss treatments but this tends to relate almost exclusively to men. Do these same treatments offer solutions to women suffering from hair loss or is there a completely different category of remedies available? It really depends on what is causing hair loss in the first place and as the most common causes of hair loss are the same as those that affect men, the treatments available are pretty similar.In an earlier article we concluded that the three most common causes of hair loss in women are female pattern baldness, telogen effluvium and alopecia areata. We'll now look at each of these in turn and examine the best treatments available, bearing in mind the specific needs of women:1. Treatments for female pattern baldness.In most instances minoxidil (Rogaine) is the first treatment used. This is one of only two FDA approved hair loss treatments and it remains the only one approved for use by women. Minoxidil comes in the form of a topical solution that works by tackling the symptoms of hair loss and helping to generate new hair growth. It does not target the causes of hair loss and will not work for everyone. The women's version of minoxidil is a 2% solution but the 5% version marketed for men can be used if necessary.The most popular drug for treating male pattern baldness is of course finasteride (Propecia). Women of child bearing age should not use this drug due to the severely damaging effects it can have on unborn male fetuses. Any women considering using Propecia should discuss it first with their physician. In some cases your doctor may prescribe a different androgen blocker called spironolactone as a means of stopping the hormone activity that is causing hair loss. Spironolactone is normally used as a diuretic and results may be variable.There is a bewildering range of commercial products available, most of which are aimed squarely at men but many are also suitable for women to use. Whether they work or not is another question but some products containing ingredients like saw palmetto, stinging nettle, pygeum and green tea have shown their value. You can find out more about these and other poential hair loss solutions by visiting the site listed at the end of this article.2. Treatments for telogen effluviumThis is a hair loss condition that generally does not require any specific treatment. Once the effects of the trauma that caused hair loss in the first place have subsided, the hair will regrow of its own accord. Some patients like to encourage the regrowth process by using minoxidil but this isn't necessary. Implementing a good nutritional regime and supplementing with B-vitamins may help to create a hair friendly environment.3. Treatments for alopecia areata.This is another hair loss condition that may resolve itself spontaneously. In some cases one of the following treatments may prove useful:    Daily application of minoxidil (Rogaine).    Injection of cortisone into patchy areas of the scalp (this must be administered by a physician). Creams and lotions containing cortisone can also be used but results are variable.    Dithranol can be applied to the scalp in mild or early cases.    Application of 100% aloe vera gel.    Massage the scalp with rosemary and lavender essential oils in a jojoba base.    Use of a hair loss product containing the Chinese herb He Shou Wu.    A product called Calosol has recently generated positive feedback.Please note, however, that none of these is guaranteed to work due to the unpredictable nature of alopecia areata. It is this uncertainty that offers opportunities for scamsters to make outlandish claims. The fact remains, there are no miracle cures for advanced forms of alopecia areata so sufferers may wish to consider other options such as head coverings and wigs.This does not mean that patients are without hope because, even in severe cases, hair can spontaneously start to grow again even after years of loss.  

We at Land of Odds get many questions about what glue to use with rhinestones and other beading and jewelry-making projects. We're craftspersons and silversmiths, and we have a shop where we sell rhinestones, beads, jewelry findings, cabochons and the like.
Nothing is perfect, but based on our experiences, here are some good tips:
  Always experiment with your adhesives first, before you use an adhesive on your final project.
  Glues vary widely in terms of which materials they stick to, how well they form a bond between two smooth surfaces, and how the glue bond ages, both in terms of durability and color.
  Clean the excess glue off your piece before you display or sell it.
  You will probably have to rely on more than one type of glue to accommodate all your types of projects.
Superglue
Superglue is not our favorite!  It often ruins rhinestones and other pieces we use in jewelry-making.  It's bond is tough, but it breaks easily.  Superglue dries like glass, and breaks like glass.
We do, however, use superglue occasionally.  We often use it seal end knots, or coat a frayed strand of cord.  We sometimes use it on crimp beads to enhance the closure.
Hot Glue Guns
Hot glue guns are fun to use.  When the materials you are using are large and bulky, hot glue guns make the projects go faster.  
The glue's bond will not last forever. The glue will yellow with age.
There is a wide variation in the types of pieces called "rhinestones". Basically, rhinestones are mirror- or foil-backed pieces of clear glass crystal, glass or plastic.
Sometimes they are faceted; othertimes they are not. Some rhinestones have a flat back so they can be glued directly to the piece; others have a pointed back so they can fit into a cup or bezel. Each design element in the architecture of the rhinestone -- base material, overall shape, faceting, foil, and effect -- adds to its shine, sparkle and brilliance. The mirror or foil reflects and refracts light. Sometimes, the mirror or foil itself has a special color, effect or treatment applied to it. The clear "glass" can range from, at the most brilliant end, very-leaded glass to somewhat leaded glass to glass to acrylic at the least brilliant end. Sometimes the glass is coated with an effect or treatment.
Your goals for gluing rhinestones into a piece of jewelry or onto a piece of clothing are simple:
   You want a bond that sticks and is durable
   You don't want the adhesive to ruin the rhinestone
   You want the glue to dry clear and "age" clear
   You don't want the glue to show outside or over the edges of the stone
   If you've gotten glue on the stone, you want to be able to get it off easily
Never use superglue with rhinestones!  Superglue clouds the stone. Superglue dries like glass, so its bond shatters like glass when the bond is disturbed.
E6000, or any other brand of epoxy, works best with glass crystal and glass rhinestones, as well as gemstones.  Epoxy is a plastic, and sometimes will dissolve or disturb the foils on the backs of acrylic rhinestones, although it is fine for acrylic cabochons or beads which do not have a foil backing.  E6000 dries like rubber, so its bond acts like a shock absorber when the piece is hit, dropped, banged or otherwise disturbed.  E6000 is great for gluing stones on cloth material, as well, and the bond will withstand several machine washings.
A rhinestone glue or Elmer's glue works OK for acrylic rhinestones.
Hot glue guns will work with the stones, but the glue doesn't age well. The bond weakens relatively quickly.  The glue yellows somewhat.
When we use E6000 with rhinestones, we put a little drop of glue on the end of a pin.  Then we touch the glue to the back of the rhinestone. We maneuver the pin-glue-rhinestone over the place where we want the stone to be.  Then we push the rhinestone in place, and simultaneously pull the pin away from the stone.  We rub the stone and around the stone with our finger or the pin to get any excess glue off.   Before it dries, E6000 rubs off like rubber cement.
About E6000
E-6000 is the jeweler's glue of choice, and our favorite. It is a one-part epoxy, (meaning you don't have to mix anything to make the glue -- it just comes out of a tube).
Perfect for attaching findings to base metal and costume jewelry pieces.
Also, use E-6000 on bead strands to seal end knots and to provide a strong, flexible seal that won't become brittle or damage the bead cord.
E-6000 is safe for use with virtually every type of gemstone and works on wood, leather, vinyl, and canvas.
Non-corrosive and self-leveling, E-6000 adheres in 5 to 10 minutes, and hardens to a clear, waterproof cure in 24 hours.   This means you have about 10 minutes to position and reposition whatever you are gluing.  If you are making jewelry, you should let the piece dry "hard" overnight, before you wear it.
We advise against using superglue for most jewelry-making projects. Superglue discolors stones.
Superglue dries like glass, so its seal shatters like glass when piece is dropped.
E6000 dries like rubber, so its seal acts like a shock absorber when a piece is dropped.
E6000 dries clear.
Two things E6000 won't do:
   Bond two pieces of smooth glass together, like   two glass disks.
   Sometimes, it will pull the foil back away from acrylic rhinestones.
Gluing Marcasites
With marcasites, we always use E6000 (or similar epoxy).  This creates the strongest bond.  
While this is not foolproof, it is the best and longest lasting solution.
Again, never use superglue.  
Also, take off your marcasite jewelry before you wash your hands, or before you attempt to wash the dishes.  The hand-soap and dish-detergent dissolve most glues.   E6000 will withstand this for awhile, but not forever.